OCTAMAS gear Power Box Pro I/O RED KOMODO-X – Gold-Mount

The OCTAMAS gear Power Box Pro I/O RED KOMODO-X mounts directly to the camera V-Mount and provides a 9pin 0B RED EXT Cable to the Camera Extension port. The keyways are strategically positioned to prevent cable collisions and optimize usability. The Power Box Pro I/O RED KOMODO-X is built to be lightweight and ultra compact.  The housing is constructed with durability in mind using aircraft grade aluminum and a minimum on plastic. Designed, manufactured and tested in Switzerland.

Features:

User-interchangeable Gold and V-mount battery plates with 2x “tucked in” D-Tap sockets

EXT 6pin 1B RED DC-IN (Hot Swap, Block Battery, Crane, Drone, Steadicam, ect). Ext. Battery is prioritized until voltage drops to 12V, then automatic switch to on board Battery.

Onboard fuse for all outputs with a 8A trip and automatic reset (approx 1min). Tripping the fuse will not out the camera.

SMBUS battery data pass-through on V-mount. SMBUS is not available on Gold mount.

Connectors:

1x 9pin 0B RED EXT Cable
1x 9pin 0B RED EXT pass-through for SmallHD or use of 9-pin breakout devices and triggers
1x 3pin 24V Fischer RS (max. 3 Amp) with Trigger protocol and trip fused
1x 6pin 1B RED DC-IN (Hot Swap, Block Battery, Crane, Drone, Steadicam, ect)
1x 4pin 00B RED CTRL RCP2 port (smallhd, c-motion, etc)
2x 2pin 0B AUX/PWR unregulated direct power from DC or Battery, trip fused
1x 5pin 0B SMPTE Timecode In/Out & GenLoc (Ambient Style)
1x BNC Genlock
2x D-Tap with shorter positive pins so ground always connects first, unregulated direct power from DC or Battery, trip fused

*Supports most Batteries up to 94mm wide. Wider Batteries require optional off-set plate.
*The inner 2pin 0B AUX/PWR connector is covered by standard sized batteries without optional off-set plate.